Mountable Toshiba 1.8 Inch To 3.5 Inch IDE Adapter

1.8 Inch HDD To CF Card Adapter

2.5 Inch IDE To 3.5 Inch IDE Hard Driver Adapter

Universal 40-Pin Female IDE To CF Card Adapter

3-LEDs Dual CF Card 40-pin Female IDE Adapter

Dual CF Card 40-pin Male IDE Adapter

Universal 40-pin Male IDE To CF Card Adapter

Big PCB Laptop 44-Pin Female IDE To CF Card Adapter

Bracket 40-Pin Male IDE To CF Card Adapter

Mini-PCI To PCI Wireless Adapter

SATA to CF Adapter

40-Pin Male IDE To SD Card Adapter

ZIF CE 1.8 Inch To IDE 2.5 Inch Adapter

ZIF CE 1.8 Inch To Toshiba 1.8 Inch Adapter

ZIF CE 1.8 Inch To CF Card Adapter

The Mountable Toshiba 1.8 Inch To 3.5 Inch IDE Adapter is transparent to the operating system and does not require any drivers. With this adapter, the computer will identify the inserted CF Card / 1.8 inch HDD as a standard IDE hard disk. As such, you can install any operating systems and the compact flash card / 1.8 inch hard disk driver will be bootable.

Specification & Features: 40-Pin standard male IDE connector.

Easy to connect the Toshiba type 1.8 inch hard disk to desktop computer .

4-Pin hard disk driver power supply .

No driver is needed .

The adapter comes with all necessary hardware to mount the drives.

Size : 115mm * 81mm .

The 1.8 Inch HDD To CF Card Adapter allows convert your toshiba , ipod 1.8 inch hard disk driver to compact flash cf card. You can install the CF card into your ipod by using this adapter in a easy way .

Specification & Features: Power supply from 1.8 inch interface.

Master or slave mode selection.

Each jumper has a cap , Mode select , cap on is master , cap off is slave .

Support IPod , please notice the IPod Video and IPod Classic using ZIP hard disk driver, it doesnot support this adapter.

Compatible with Compact Flash Type I, Type II, and support IBM Micro-drive with CF-II interface.

Supports DMA and Ultra DMA modes. A compatible flash media card will be required to use these modes.

Compatible* with DOS, Windows 3.1, NT4, 98SE, Me, 2000 and XP, Vista, Unix, Linux .

Size: 51mm * 47mm .

The 2.5 Inch IDE To 3.5 Inch IDE Hard Driver Adapter is transparent to the operating system and does not require any drivers. With this adapter, the computer will identify the 2.5 inch laptop hard disk driver as a standard 40-Pin IDE desktop computer hard disk. As such, you can install any operating systems and 2.5 inch hard disk driver will be bootable in desktop computer.

Specification & Features: 40-Pin standard male IDE connector.

44-Pin standard female IDE connector.

Easy to connect 2.5 inch hard disk driver to desktop computer .

4-Pin hard disk driver power supply .

No driver is needed .

Size : 89mm * 34mm .

The IDE to CF adapter is transparent to the operating system and does not require any drivers. With this adapter, the host PC will identify the inserted CF card as a standard IDE hard disk. As such, you can install any operating systems and the CF card will be bootable , CF card offer the benefit of low power consumption, no acoustic noise, cost efficient and fast read access time , avoid damaging mechanical HDD cause of by turnning on/off power freqently. The Universal 40-Pin Female IDE To CF Card Adapter can used for computer peripheral device factory , industial computer , personal computer . It can plug into mainboard directl

Specification & Features: 40-Pin standard Female IDE connector.

50-Pin standard compact flash socket.

+5 V floppy disk drive power connector.

Two mounting holes.

Plug into mainboard directly.

Master or slave mode selection.

Each jumper has a cap , cap on Pin 1-2 is master , cap on Pin 2-3 or no cap is slave .

Compatible with Compact Flash Typ

The 3-LEDs Dual CF Card 40-pin Female IDE Adapter is transparent to the operating system and does not require any drivers. With this adapter, the host PC will identify the inserted CF card as a standard IDE hard disk. As such, you can install any operating systems and the CF card will be bootable , CF card offer the benefit of low power consumption, no acoustic noise, cost efficient and fast read access time , avoid damaging mechanical HDD cause of by turnning on/off power freqently. The 3-LEDs Dual CF Card 40-pin Female IDE Adapter can used for computer peripheral device factory , industial computer , personal computer . The 3-LEDs Dual CF Card 40-pin Female IDE Adapter can plug into mainboard directly. It has 3 LEDs , green LED indicates card detect , yellow LED indicates active , red LED indicates power ,it also support dual slot compact flash cf card .

Specification & Features: 40-Pin standard Female IDE connector.

50-Pin standard compact flash sock

The Dual CF Card 40-pin Male IDE Adapter is transparent to the operating system and does not require any drivers. With this adapter, the host PC will identify the inserted CF card as a standard IDE hard disk. As such, you can install any operating systems and the CF card will be bootable , CF card offer the benefit of low power consumption, no acoustic noise, cost efficient and fast read access time , avoid damaging mechanical HDD cause of by turnning on/off power freqently. The Dual CF Card 40-pin Male IDE Adapter can used for computer peripheral device factory , industial computer , personal computer . Dual CF Card 40-pin Male IDE Adapter works with an 40-Pin ATA cable, floppy driver power supply and support dual slot compact flash cf card .

Specification & Features: 40-Pin standard male IDE connector.

50-Pin standard compact flash socket.

Dual compact flash slot .

+5 V floppy disk drive power connector.

Two mounting holes.

Master or slave mode se

The IDE to CF adapter is transparent to the operating system and does not require any drivers. With this adapter, the host PC will identify the inserted CF card as a standard IDE hard disk. As such, you can install any operating systems and the CF card will be bootable , CF card offer the benefit of low power consumption, no acoustic noise, cost efficient and fast read access time , avoid damaging mechanical HDD cause of by turnning on/off power freqently. The SLCI4001 Universal 40-pin Male IDE To CF Card Adapter can used for computer peripheral device factory , industial computer , personal computer . It works with an 40-Pin ATA cable and floppy driver power supply .

Specification & Features: 40-Pin standard male IDE connector.

50-Pin standard compact flash socket.

+5 V floppy disk drive power connector.

Two mounting holes.

Master or slave mode selection.

Each jumper has a cap , cap on Pin 1-2 is master , cap on Pin 2-3 or no cap is slave .

Compatible with Compact Flash Type

The Big PCB Laptop 44-Pin Female IDE To CF Card Adapter is transparent to the operating system and does not require any drivers. With this adapter, the host PC will identify the inserted CF card as a standard IDE hard disk. As such, you can install any operating systems and the CF card will be bootable , CF card offer the benefit of low power consumption, no acoustic noise, cost efficient and fast read access time , avoid damaging mechanical HDD cause of by turnning on/off power freqently. The Big PCB Laptop 44-Pin Female IDE To CF Card Adapter can used for computer peripheral device factory , industial computer , personal computer ,laptop computer. The Big PCB Laptop 44-Pin Female IDE To CF Card Adapter works with an 44-Pin IDE cable and power supply from IDE , replacement of 2.5 inch IDE Hard disk driver.

Specification & Features: 44-Pin standard male IDE connector.

50-Pin standard compact flash socket.

Power supply from IDE.

Replacement of 2.5 in

The Bracket 40-Pin Male IDE To CF Card Adapter is transparent to the operating system and does not require any drivers. With this adapter, the host PC will identify the inserted CF card as a standard IDE hard disk. As such, you can install any operating systems and the CF card will be bootable , CF card offer the benefit of low power consumption, no acoustic noise, cost efficient and fast read access time , avoid damaging mechanical HDD cause of by turnning on/off power freqently. The Bracket 40-Pin Male IDE To CF Card Adapter can used for computer peripheral device factory , industial computer , personal computer . The Bracket 40-Pin Male IDE To CF Card Adapter works with an 40-Pin ATA cable and floppy driver power supply , it also can fix on PCI bracket for external application . Specification & Features: 40-Pin standard Male IDE connector.

50-Pin standard compact flash socket.

+5 V floppy disk drive power connector.

PCI rear bracket for external ap

The Mini-PCI To PCI Wireless Adapter allows convert Mini-PCI to PCI interface ,it is suitable for wireless network card in standard Computer PCI Slot .

Specification & Features: No Need to install specific driver for the adapter.

Support 11/54 /108 b/g WiFi Wireless.

Mini PCI Voltage : 3.3V.

the Adapter exchange Data Speed : Max . 600MB/s.

Use your Mni PCI card on Desktop with PCI Slot.

Suitable for wireless network card in Standard computer PCI

SATA-CF Adapter is designed to enable Compact Flash (CFI/II) media to be used as a direct replacement for a 2.5 inch SATA hard drive. As a result, any equipment, such as Notebook computer, that uses a 2.5 inch SATA hard drive can be easily converted to use the low power and shock resistant CF media. Once installed, the CF appears as an ordinary hard drive to any OS and can be configured as a boot device. Specification & Features: Enable Compact Flash (CF) to be used like ordinary 2.5 inch SATA hard drive .

Compatible with CFI/II .

SATA interface .

Mounts directly onto notebook 2.5 inch SATA connector .

CF Card can be the primary bootable device containing the OS and applications.

Transparent to the operating system and does not require any drivers .

Supports DMA and Ultra DMA modes (only on flash media card with such features).

Compatible with DOS, Windows 3.1, NT4, 98SE, Me, 2000, XP, Vista, Mac, Linux

The 40-Pin Male IDE To SD Card Adapter is transparent to the operating system and does not require any drivers. With this adapter, the host PC will identify the inserted SD card as a standard IDE hard disk. As such, you can install any operating systems and the SD card will be bootable . It works with an 40-Pin ATA cable and harddisk driver power supply .

Specification & Features: Hot-swapable .

Converts Secure Digital Card into IDE compatible hard drives.

Bootable solution for PC .

4-pin computer power supply connector.

You can install the OS onto the SD Card .

No hard disk noise from your workstation .

Compatible with MMC system specification 2.0 , SD Memory Card specification 1.0 , SDHC Memory Card .

Compatible with DOS, Linux, Windows 98SE, Me, 2000, XP and Vista .

Support PIO, Multi-Word DMA and Ultra DMA data transfer mode .

Dimensions: 80.2mm * 70.2mm .

The ZIF CE 1.8 Inch To IDE 2.5 Inch Adapter is transparent to the operating system and does not require any drivers. With this adapter, the computer will identify the 1.8 inch ZIF CE hard disk driver as a standard 44-Pin 2.5 inch IDE laptop computer hard disk. As such, you can install any operating systems and 1.8 inch ZIF CE hard disk driver will be bootable.

Specification & Features: 44-Pin standard male IDE connector.

Easy to connect 1.8 inch ZIF CE hard disk driver to laptop computer .

Power from 44-Pin IDE interface .

No driver is needed .

2 LEDs , LED1 indicates +3.3V , LED2 indicates active .

Master or slave mode selection.

Each jumper has a cap , Mode select , open is master , close is slave .

Package with 2 pcs FFC cable for Toshiba /For Hitachi 1.8 inch ZIF version hard drive .

Size : 53mm * 33.5mm .

The ZIF CE 1.8 Inch To Toshiba 1.8 Inch Adapter is transparent to the operating system and does not require any drivers. With this adapter, the computer will identify the 1.8 inch ZIF CE hard disk driver as a standard Toshiba 1.8 inch hard disk. As such, you can install any operating systems and 1.8 inch ZIF CE hard disk driver will be bootable. It also can replace youriPod hard disk driver with 1.8" ZIF version Toshiba/Hitachi hard drive .

Specification & Features: Replace youriPod hard disk driver with 1.8" ZIF version Toshiba/Hitachi hard drive .

No driver is needed & Easy to install .

Package with 2 pcs FFC cable for Toshiba /For Hitachi 1.8 inch ZIF version hard drive .

Size : 34mm * 25mm .

The ZIF CE 1.8 Inch To CF Card Adapter is transparent to the operating system and does not require any drivers. With this adapter, the computer will identify the CF card as a standard ZIF 1.8 inch hard disk. As such, you can install any operating systems and compact flash card will be bootable.

Specification & Features: 1.8 inch ZIF CE interface .

50-Pin standard compact flash socket.

Replace a 1.8 inche ZIF Hard disk Drive by a Compact Flash (CF) Card.

Compatible with Compact Flash Type I, Type II, and support IBM Micro-drive with CF-II interface.

Supports DMA and Ultra DMA modes. A compatible flash media card will be required to use these modes.

Compatible* with DOS, Windows 3.1, NT4, 98SE, Me, 2000 and XP, Vista, Unix, Linux .

Size : 67mm * 54mm * 6mm